BiteglenIntroductions to dental imaging and patient-communication software

Intraoral scanning and CAD/CAM · 5 tools

Top 5 digital impression and monitoring tools for aligner workflows

By the Biteglen editorial team · Published · Updated · Facts checked 21 November 2026 (Asia/Dhaka)

For capturing scans and following aligner progress, the shortlist begins with iTero Element, 3Shape TRIOS and Dental Monitoring. It is written for orthodontists and general practices that provide aligners and want to see which tools cover scanning, case submission and remote follow-up, according to the vendors' own documentation.

At a glance: the shortlist in order of fit for this use case
#ToolBest forKey featurePlatforms / deploymentPricingMore
1iTero ElementAlign TechnologyInvisalign providers and orthodontic practices that want scanning and case submission in one systemScan images auto-uploaded to Invisalign case submissions in place of intraoral photosMobile configuration (with trolley) and PC configurationSee vendor pricing pageIntroduction
23Shape TRIOS3ShapePractices that want an open scanner platform for sending cases to chosen partnersOpen workflow engine for choosing partners and treatmentsWorks with PC or Mac over Wi-FiSee vendor pricing pageIntroduction
3Dental MonitoringDental MonitoringOrthodontic practices that want to follow aligner progress remotely between visitsPatients scan weekly from home, allowing tracking of over 60 parameters, 21 of which are cleared as a medical devicePatient smartphone or ScanBox pro, with the DM Dashboard for practicesSee vendor pricing pageIntroduction
4Launca DL-300Launca MedicalPractices looking for a wireless scanner with a scan-and-send workflow aimed at beginnersWireless intraoral scannerNot stated on official pagesSee vendor pricing pageIntroduction
5PrimescanDentsply SironaPractices that want a general digital impression scanner that can sit alongside an existing workflowSupports restorative, implant, orthodontic and sleep appliance workflowsNot stated on official pagesSee vendor pricing pageIntroduction

1 iTero Element

By Align Technology

iTero Element is a family of intraoral 3D scanners from Align Technology for restorative and orthodontic scanning. It adds imaging, diagnostic aid and Invisalign workflow tools.

Why it is here: It sits first because it is the entry most directly tied to aligner work: scan images can be auto-uploaded to Invisalign case submissions, and iTero TimeLapse technology monitors changes in oral health over time.

Best for
Invisalign providers and orthodontic practices that want scanning and case submission in one system
Key features
  • Scan images auto-uploaded to Invisalign case submissions in place of intraoral photos
  • Invisalign Outcome Simulator showing a 3D model of a potential future smile
  • iTero TimeLapse technology for monitoring changes in oral health over time
  • Cloud-based platform for managing cases and communicating with iTero-enabled labs
  • Open system with STL and PLY export
Limits
The Invisalign-specific tools are documented around Invisalign case submission; practices working with other aligner brands should check the vendor documentation for how scans move into those workflows. Some features, such as NIRI imaging, are documented only for some models.
Platforms / deployment
Mobile configuration (with trolley) and PC configuration
Pricing
See vendor pricing page (not quoted here; facts checked 21 November 2026, Asia/Dhaka)

2 3Shape TRIOS

By 3Shape

3Shape TRIOS is a family of intraoral scanners, with TRIOS 5 as the focus of the official page. It is built for restorative and prosthetic workflows and connects with many labs, partners and practice management systems.

Why it is here: It follows iTero Element because its open workflow engine lets practices choose their own partners and treatments, which suits practices sending scans to different aligner providers, though the page centres on restorative and prosthetic work.

Best for
Practices that want an open scanner platform for sending cases to chosen partners
Key features
  • Open workflow engine for choosing partners and treatments
  • Case tracking and sending, photo sharing and partner communication from any device
  • ScanAssist technology to reduce stitching errors and help recover tracking
  • Alignment technology, haptic feedback and automatic soft tissue and artifact removal
  • Built-in wireless technology
Limits
The official page describes restorative and prosthetic workflows and does not describe aligner-specific submission or remote monitoring; orthodontic teams should check the vendor documentation for those steps.
Platforms / deployment
Works with PC or Mac over Wi-Fi
Pricing
See vendor pricing page (not quoted here; facts checked 21 November 2026, Asia/Dhaka)

3 Dental Monitoring

By Dental Monitoring

DentalMonitoring is an AI-powered platform for remote orthodontic treatment monitoring. It uses patient smartphone or ScanBox photos to track treatment and support practice workflows.

Why it is here: It is the only entry here built around remote follow-up, monitoring aligners, braces and retention with weekly scans from home, so it complements the scanner entries rather than replacing them.

Best for
Orthodontic practices that want to follow aligner progress remotely between visits
Key features
  • Patients scan weekly from home, allowing tracking of over 60 parameters, 21 of which are cleared as a medical device
  • AI can analyze, detect and report on 130 oral events from smartphone images
  • ScanBox pro device for patients to capture intraoral images at home
  • Monitors aligners, braces and retention
  • Updated STL file can be exported remotely via the DM Dashboard
Limits
It is documented as a monitoring platform and does not replace an intraoral scanner for initial impressions. The vendor's regulatory statements (FDA De Novo, MDR) are the company's own descriptions, so check the documentation for your region.
Platforms / deployment
Patient smartphone or ScanBox pro, with the DM Dashboard for practices
Pricing
See vendor pricing page (not quoted here; facts checked 21 November 2026, Asia/Dhaka)

4 Launca DL-300

By Launca Medical

The Launca DL-300 is a wireless 3D intraoral scanner from Launca Medical, unveiled at IDS 2023 as the next-generation model in its scanner line.

Why it is here: It sits fourth because the vendor describes digital impressions covering orthodontics and open output for CAD/CAM platforms, but the aligner-specific tools described for the earlier entries are not documented for it.

Best for
Practices looking for a wireless scanner with a scan-and-send workflow aimed at beginners
Key features
  • Wireless intraoral scanner
  • Promoted as capable of full-arch scans in about 10 seconds
  • Scan-and-send digital workflow aimed at beginners
  • Launca scanners described as open to CAD/CAM platforms with STL/PLY output
  • Digital impressions from a single tooth to a full arch, including orthodontics
Limits
The statements on openness and orthodontic coverage come from the DL-206P page for the Launca scanner line, so teams should confirm DL-300 details in the vendor documentation. No aligner submission or remote monitoring tools are described.
Platforms / deployment
Not stated on official pages
Pricing
See vendor pricing page (not quoted here; facts checked 21 November 2026, Asia/Dhaka)

5 Primescan

By Dentsply Sirona

Primescan is Dentsply Sirona's intraoral scanner for digital impressions. It can be used standalone or as the entry point to the CEREC chairside workflow.

Why it is here: It closes the list because orthodontic workflows are one of several it supports, and the page is framed around general digital dentistry and chairside restorations.

Best for
Practices that want a general digital impression scanner that can sit alongside an existing workflow
Key features
  • Supports restorative, implant, orthodontic and sleep appliance workflows
  • Can work standalone alongside an existing workflow
  • Scan data can be provided in STL format
  • DS Core cloud storage and sharing
  • Full-arch scan takes under one minute
Limits
The official page lists orthodontic workflows among its supported uses but does not describe aligner case submission or remote monitoring; check the vendor documentation for those steps.
Platforms / deployment
Not stated on official pages
Pricing
See vendor pricing page (not quoted here; facts checked 21 November 2026, Asia/Dhaka)

How we chose these tools

We looked at how closely each tool, as documented, is tied to orthodontic scanning and aligner treatment follow-up. We also considered documented capabilities such as file export, case-sharing and monitoring features, plus the device and platform details each vendor publishes. Scanners and a remote monitoring platform appear together because the use case covers both capturing scans and tracking progress afterwards.

All facts come from official vendor pages and were checked on the dates recorded in our notes. The order reflects editorial fit for this specific use case, as explained in the note under each entry, and it is not a statement that one tool is better than another overall. The list is built from documentation rather than product trials, and each entry names the boundaries of what the vendor documents. Pricing is not covered here; see each vendor's pricing page.

Order used in this guide: Ordered by how closely each product is tied to orthodontic scanning and aligner treatment follow-up.

Frequently asked questions

Which scanner can send scans directly to Invisalign?

iTero Element documents that scan images can be auto-uploaded to Invisalign case submissions in place of intraoral photos. It also offers a cloud-based platform for managing cases and communicating with iTero-enabled labs.

How can I monitor aligner progress remotely?

DentalMonitoring documents weekly patient scans from home using a smartphone or the ScanBox pro device. It monitors aligners, braces and retention, and practices can export an updated STL file via the DM Dashboard.

Which scanners export STL files for aligner workflows?

iTero Element documents STL and PLY export, and Primescan states that scan data can be provided in STL format. Launca describes its scanners as open to CAD/CAM platforms with STL/PLY output.

Can one practice use a scanner together with a monitoring platform?

The documentation presents them as separate tools for different stages: scanners capture impressions, and DentalMonitoring tracks treatment from patient photos. Check the vendors' documentation to confirm how they work together in your setup.

Sources. Facts on this page come from each vendor's official pages, checked on the dates shown (Asia/Dhaka):

Biteglen is independent and not affiliated with the vendors listed. No vendor paid for inclusion or position. Product names belong to their owners. Features and prices change; confirm details on each official website.